Uni-mat
- Material: Rubber granules chemically bound with PUR
- Breaking elongation/conditions: 46 / in accordance with DIN 53505 (average)
- Granulate grid: Coarse
- Moulded density/conditions: 730 kg/m³ / in accordance with DIN EN ISO 845 (average)
- Min./max. temperature resistance: -40 to 110 °C
- Heat conductance λ: 0.14 W/(m*K)
- Water-vapour diffusion resistance factor value µ: 14
- Tensile strength / conditions: 0.42 MPa / in accordance with DIN EN ISO 1798 (average)
- Building material class: B2 - Normally inflammable
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
For decking substructures
The Uni-mat is used in decking substructures as a vibration-absorbing and moisture-protecting intermediate layer under the support beam. In addition, the Uni-mat can also be used for height compensation as an underlay, e.g. in corners for patio tiles, stone tiles or wooden floorboards.
The Uni-mat rolls are used as a continuous intermediate layer under the support beam of the decking construction, if the beams are laid in the direction of the water flow. Where the support beams are laid crosswise to the water direction, Uni-mat pads are inserted at specific intervals, so that the drainage of water and possible dirt is not obstructed and there is no possibility of waterlogging occurring.
- Material: Rubber granules chemically bound with PUR
- Breaking elongation/conditions: 46 / in accordance with DIN 53505 (average)
- Granulate grid: Coarse
- Moulded density/conditions: 730 kg/m³ / in accordance with DIN EN ISO 845 (average)
- Min./max. temperature resistance: -40 to 110 °C
- Heat conductance λ: 0.14 W/(m*K)
- Water-vapour diffusion resistance factor value µ: 14
- Tensile strength / conditions: 0.42 MPa / in accordance with DIN EN ISO 1798 (average)
- Building material class: B2 - Normally inflammable
