Threadlocker medium-strength
- Volume: 10 ml
- Colour: Blue
- Min./max. processing temperature: 10 to 40 °C
- Thread diameter (metric thread): 36 mm
- Thread type: Metric thread
- Min. flashing point: +65 °C
- Min./max. application temperature: -55 to +180 °C
- Density: 1.10 g/ml
- Customs Tariff Numbers: 35061000
- Width Package: 85.00
- Height Package: 200.00
- Depth Pagage: 40.00
- Cross Weight: 42.00
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
The medium-strength threadlocker prevents unintentional loosening of screws, for example due to vibrations.
Product hardening (polymerisation) takes place under the absence of atmospheric oxygen (anaerobic) and with the catalytic action of the metal (contact with metal). Seals and closes off many types of screw connections.
- fast hardening on a large number of ferrous metals
- high resistance to vibrations
- secured medium-duty screws should be removed with tools
- increased oil compatibility
Compared to standard anaerobic adhesives, this product is completely non-hazardous. In addition to a longer shelf life of 24 rather than 12 months, it also offers the user improved storage stability and increased temperature resistance by up to +180 °C in use.
The shelf life is a maximum of 24 months, at the optimal storage temperature of between +5 °C and +23 °C in the original closed container. A higher storage temperature will lead to a significantly shorter shelf life. The storage temperature must not go below +5 °C.
The medium-strength threadlockers are not suitable for: Metal and plastic flange connections, in areas where oxygen gas is used, or for sealing against media with strongly oxidising acids.
The product must only be applied on standard metal threads. The surface concerned must be free of grease and completely clean. Then completely fill the gap between the two parts with the threadlocker, put the parts together and seal completely. An inadequate seal can lead to leaks over time.
Do not move the parts after the hardening process has started. Let the bond completely harden for 24 hours before commissioning. In the case of series productions, clamp or secure the bond with a pipe wrench to avoid the layer that is already forming during the hardening process from breaking up.
Please consult the safety data sheet before using the product.
Hardening properties:
Touch-dry after 5-15 minutes
Functional strength after 3-6 hours
Final strength after 12-24 hours
- Volume: 10 ml
- Colour: Blue
- Min./max. processing temperature: 10 to 40 °C
- Thread diameter (metric thread): 36 mm
- Thread type: Metric thread
- Min. flashing point: +65 °C
- Min./max. application temperature: -55 to +180 °C
- Density: 1.10 g/ml
- Customs Tariff Numbers: 35061000
- Width Package: 85.00
- Height Package: 200.00
- Depth Pagage: 40.00
- Cross Weight: 42.00
