Stud anchor BZ PLUS
- Material: Steel
- Surface: Zinc plated
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
- Metric thread with hexagon nut
- Can be loaded immediately after installation
- High load-bearing capacities, small edge distances
- Fire resistance class R30, R60, R90 and R120 (M10-M16)
The permissible values for tensile load under fire load can be found in the approval.
The BZ Plus stud anchor is suitable for single fixing in the medium- and heavy-load range: Anchorage with European Technical Approval in cracked concrete (tension zone) and non-cracked concrete (compression zone).
For this reason, the following applies to fixings with the BZ Plus stud anchor:
The anchor has European Technical Approval for anchorage in reinforced or unreinforced standard concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206:2000-12
For use in concrete C20/25 and pressure-resistant natural stone (without approval)
The BZ Plus stud anchor may only be used in dry indoor room conditions
Suitable for anchorages with predominantly static loads (e.g. tare weight, fittings, stored materials) or quasi-static loads (e. g. façade constructions, railings)
Can be used for fixing anchor plates, steel girders, cable trays, metal constructions, metal profiles, consoles, footboards, supports, pipes, railings, wooden constructions, beams etc.
Push-through installation
Make the drill hole through the attachment part
Clean the drill hole
Knock in the BZ Plus bolt anchor with a hammer or machine setting tool
For final anchoring, apply torque with torque wrench
Installation must be carried out in accordance with the approval certificate!
Proofs of performance:
- Material: Steel
- Surface: Zinc plated
