Press-in anchor, one-sided
- Outer diameter: 62 mm
- Mounting hole diameter: 12.4 mm
- Height: 8.7 mm
- Material thickness: 1.2 mm
- Material: Steel
- Surface: Hot dip galvanized
- Nail-hole diameter: 3.5 mm
- Press depth: 7.5 mm
- Width Package: 60.00
- Height Package: 10.00
- Depth Pagage: 60.00
- Cross Weight: 28.00
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
One-sided.
Press-in anchors with teeth on one side are used for connections between wood and steel, e.g. for the fastening of criss-crossing wood with steel supports or for securing the position of purlins on beams or for connecting frame corners.
Press-in anchors with teeth on one side are fastened with bolts that pass through the wood, the press-in anchor and then through the steel support to be connected. The press-in anchor is pressed into the wood after drilling the mounting hole. Depending on the wood and general conditions, the use of a hydraulic press-in tool may be necessary.
When using press-in anchors, the requirements of the wooden construction standard regarding the edge and end distances must be observed.
- Outer diameter: 62 mm
- Mounting hole diameter: 12.4 mm
- Height: 8.7 mm
- Material thickness: 1.2 mm
- Material: Steel
- Surface: Hot dip galvanized
- Nail-hole diameter: 3.5 mm
- Press depth: 7.5 mm
- Width Package: 60.00
- Height Package: 10.00
- Depth Pagage: 60.00
- Cross Weight: 28.00
