Plasterboard plugs, plastic
- Nominal diameter: 13 mm
- Nominal length: 24 mm
- Suitable for screw diameter min.: 4.0 mm
- Suitable for screw diameter max.: 6.0 mm
- Material: Nylon (polyamide)
- Drill hole diameter: 10 mm
- Min. drill hole depth: 60 mm
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
Non-load-bearing masonry, plaster or insulation must be taken into account. These are not considered anchoring substrates.
This information is based on factory testing. It should be considered a general recommendation and must be adapted to the respective materials by local testing. A safety factor must be taken into account. The information does not apply to cases requiring technical approval. It does not constitute approval. Recommended safety value: 5x.
The screw-in/insulation anchor is suitable for mounting in polystyrene, hard foam plates and soft materials. It prevents the formation of cold bridges and compresses the material.
1. Screw in the screw-in anchor on the TX bit or wrench
2. Secure component with screw *
Screw length = 70 mm + component thickness
*The screw diameter can be reduced using a 6-mm expansion plug.
- Nominal diameter: 13 mm
- Nominal length: 24 mm
- Suitable for screw diameter min.: 4.0 mm
- Suitable for screw diameter max.: 6.0 mm
- Material: Nylon (polyamide)
- Drill hole diameter: 10 mm
- Min. drill hole depth: 60 mm
These data are based on factory tests, they are to be considered as a general recommendation and must be adapted by local experiments on the respective materials. A safety factor must be taken into account. The information does not apply to building supervisory relevant cases. Recommended safety value: 5-fold
