Metal anchor with screw
- Width across flats: 13 mm
- Thread type x Thread diameter (metric thread): M8
- Min. drill hole depth: 80 mm
- Nominal length: 80 mm
- Drill hole diameter: 10 mm
- Max. grip range: 15 mm
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
Under normal working conditions, a safety factor of ≥4 is recommended.
Drill distance = at least double the depth of the first hole.
The metal anchor is suitable for single fixing in medium- and heavy-duty applications in non-cracked concrete (compression zone).
For this reason, the following applies to fixings with metal anchor:
For use in concrete C20/25 and pressure-resistant natural stone (without approval)
The metal anchor may only be used in dry indoor room conditions
Suitable for anchorages with predominantly static loads (e.g. tare weight, fittings, stored materials) or quasi-static loads (e. g. façade constructions, railings)
Can be used for fastening steel structures, metal profiles, consoles, footplates, cable trays, pipes, mounting rails etc.
Push-through installation
Drill hole through the component
Clean the drill hole
Knock the metal anchor into the substrate through the component
For final anchoring, apply torque with torque wrench
- Width across flats: 13 mm
- Thread type x Thread diameter (metric thread): M8
- Min. drill hole depth: 80 mm
- Nominal length: 80 mm
- Drill hole diameter: 10 mm
- Max. grip range: 15 mm
