Joist hanger, inner
- Material thickness: 2 mm
- Mounting hole diameter: 11 mm
- Nail-hole diameter: 5 mm
- Material: Steel
- Surface: Sendzimir galvanized
- Min. screw length: 40 mm
- Max. screw length: 100 mm
- Approval: ETA-09/0021
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
The inner joist hangers are used for side and main beam connections or for connections on supports in load-bearing wooden constructions. This involves the connection of wooden components to one another as well as connecting wooden components to concrete or steel parts. This is often achieved with “screw/nail combinations”.
When connecting joist hangers to wood or wood materials, anchor nails (ring shank nails) are to be used of dia. 4.0 mm.
The maximum load rating on the joist hanger is achieved only with complete nailing. Partial nailing is also permitted in the case of reduced load.
The defined load rating is valid for the installation method shown (see diagram). The requirements for edge and spacing distances must be observed in accordance with valid standards and installation must be carried out in accordance with the approval certificate!
The nails used in the mounting of joist hangers must comply with EN 14592: Use of special nails of load rating class III according to DIN 1052:2004-08, Section 12.8(5).
In this respect, we recommend using our anchor nails (load rating class III according to DIN 1052-2)!
- Material thickness: 2 mm
- Mounting hole diameter: 11 mm
- Nail-hole diameter: 5 mm
- Material: Steel
- Surface: Sendzimir galvanized
- Min. screw length: 40 mm
- Max. screw length: 100 mm
- Approval: ETA-09/0021
