Insulating tape
- Thickness: 0.15 mm
- Adhesive force (per unit of length): 2.1 N/cm
- Adhesive base: Acrylate
- Min.unroll force / condition: 3
- 0 N / 19 mm
- Dielectric strength: 8 kV/mm
- Max. temperature resistance: 70 °C
- Min. temperature resistance: -10 °C
- Adhesive tape backing material: Soft-PVC-foil
- unleaded
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
Ozone-resistant
Resistant to ageing, temperature and weather
Abrasion-resistant
Tear resistance: 20 N/cm
Electrical installation and repair tape made of PVC, VDE-tested according to DIN EN 60454-3-1.
The suitability of the adhesive tapes should be checked by the user in preliminary tests.
For standard insulation work in electrical applications.
Can also be universally used for repairs, for colour-coded markings and bundling.
Apply adhesive tape to the surface immediately after dispensing and press on firmly. The best results are obtained at a processing temperature of between 20°C and 24°C.
The adhesion surface must be free of oil, powder, dirt, release agents or other contamination. The adhesive strength can be affected by plasticisers in the material to be glued.
- Thickness: 0.15 mm
- Adhesive force (per unit of length): 2.1 N/cm
- Adhesive base: Acrylate
- Min.unroll force / condition: 3
- 0 N / 19 mm
- Dielectric strength: 8 kV/mm
- Max. temperature resistance: 70 °C
- Min. temperature resistance: -10 °C
- Adhesive tape backing material: Soft-PVC-foil
- unleaded
