Anchor nail, zinc-plated
- Wire diameter: 4 mm
- Notch diameter: 4.4 mm
- Material: Steel
- Surface: Zinc plated
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
* Incl. VAT excl. Shipping
- Corresponds to load-bearing capacity class III according to DIN 1052-2
- Shaft with rolled-on barb profile for high pull-out forces
- Nail head with conical lower part for optimal fit in the wood connector
The anchor nail is primarily used in wooden constructions for the secure connection of steel sheets and steel parts (e.g. brackets, joint hangers, purlin anchors, etc.) to wood.
The steel plates or steel parts must have circular holes with a diameter of 4.5 to 5.5 mm to accommodate the anchor nails.
In damp rooms and outdoors, non-corrosive materials must be used for mounting (DIN 18360, Section 3.1.4.1).
In accordance with regulations on wood constructions, all pre-punched holes in a wooden connector (e.g. brackets, joist hangers, purlin anchors etc.) must take nails.
Installation must be carried out in accordance with the approval certificate!
- Wire diameter: 4 mm
- Notch diameter: 4.4 mm
- Material: Steel
- Surface: Zinc plated
